Upgraded 1/2 Mile 4-Zone Solar Driveway Alarm Kit
Upgraded 1/2 Mile 4-Zone Solar Driveway Alarm Kit
Upgraded 1/2 Mile 4-Zone Solar Driveway Alarm Kit

Upgraded 1/2 Mile 4-Zone Solar Driveway Alarm Kit

$79.99

Upgraded Smart Wireless Driveway Alarm can be armed and disarmed through the App, so you can let it work for you in partial time;
The alarm chime of a certain defense zone can be changed in the App, and there are 27 chimes to choose from, you can add channel voice before the alarm chime to let you easily know which zone triggered.

Highlights

Remote App Alert Notification: You will receive a notification if a suspicious person enters your house while you are away. Then you can open your security camera in advance to see what happened.
Note: the smart driveway alarm only could be compatible with the 2021 new solar sensor with the label 'P' on the back. 

App Remote Arm & Disarm:A defense zone can be armed and disarmed through the App, so you can let it work for you in partial time

App Remote Custom Chimes: The alarm chime of a certain defense zone can be changed in the App, and there are 27 chimes to choose from, you can add channel voice before the alarm chime to let you easily know which zone triggered.

Super Long Range:deally maximum 1/2 mile wireless for the solar sensor and receiver, tested in severe weather conditions. The distance is double that of most competitor's. 
Easy Setup and Use:
Install in minutes. Supported by PIR(passive infrared sensor). Alerts with optional sound and light. Both the receiver and sensor have off mode. No Internet and phone connection needed. Works at night.  

Super Long Range:deally maximum 1/2 mile wireless for the solar sensor and receiver, tested in severe weather conditions. The distance is double that of most competitor's. 
Easy Setup and Use:
Install in minutes. Supported by PIR(passive infrared sensor). Alerts with optional sound and light. Both the receiver and sensor have off mode. No Internet and phone connection needed. Works at night.  

Overview

Dimensions: 8.35 x 4.61 x 2.68 inches for Package
Includes: 1 sensor, 1 receiver, 1 AC adapter, mounting hardware.
Sensor Range: Sensor detection up to 30 ft.The sensitivity can be adjusted.
Frequency: The frequency of the transmitter is 433mHz. Sensor Type: PIR (passive infrared )
Zones: Supports up to 7 sensors on each zone. 7 different tones allows you to distinguish which sensor was triggered and prevent interference. Volume is adjustable.
Power: The receiver can be plugged in using an included AC adapter or can run on 4 AA batteries (not included). A sound will alert low sensor batteries. Solar panel and built-in 18650 lithium-ion battery with DC5V adapter for the sensor.

Lights: Blue light shows the receiver is on. Red light shows the motion from the sensor. The receiver has a low battery alert light.
Weather: The working temperature range is from -20℃ to 60℃.
Installation: Sensor can be mounted to fences, trees, posts, mailbox and walls with included mounting hardware. Receiver can be portable up to 1/2 mile ideally without obstacles. Please make sure there is no metal interference. Set your sensor above the ground around 4.5-6 ft high. No straight light or leaves etc to the sensor eye. The sensor angle affects the range.
Warranty: Two-year warranty. 24/7 customer service and technical support.
Model Number: BT274

Testimonials

@coxhomestead_kodak

“This driveway sensor is helpful for more than just knowing when someone is at the stand. It also lets me know when the mail carrier has come, when my kids are sneaking over to the neighbors, and when my husband is pulling in from work”

@Karl's Off the grid

“It was really nervous when a guy enters my property. What I did was to set up a camera but I want to be one step ahead. I want to know when they enters. It works pretty good for me at the cabin."

Watch full review video

Reviews

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

FAQs

1. How does Wireless Driveway Alarm work?
The sensor has a passive infrared lens that activates when it senses both heat and motion. When the sensor is triggered by a person, car, or large animal, a signal is sent to the receiver in your home that will alert you with the sound you choose from the zones. The ideal maximum range between the receiver and sensor is 1/2 mile. The sensor has a maximum 30ft detection distance and the sensitivity is adjustable with low(approx 20ft.) and high(30ft.) mode. There's no wifi or monthly contracts required. Additionally, the system is weather-resistant and designed to work throughout the seasons. It works the same for day and night. It’s perfect to be used to detect who's on your property, when the mailman arrives, and more, especially for rural areas with driveways.

2. How do I know which system works best for me?
All of our driveway alarm kits have 1/2 mile wireless long range for the sensor and receiver. eMACROS driveway alarm features solar and rechargeable sensors. The 4-zone kit has the 4-zone receiver(square and round option) which supports up to 4 sensors and the 7-zone kit also has two color options. The Hosmart driveway alarm has 4-zone kits (two color options) featuring a rechargeable sensor with better price.

3. Are the solar wireless driveway alarm and the rechargeable driveway alarm compatible with each other?
No, the sensor and receiver can only be paired if they're the extras from the same kit.

4. How are the wireless driveway alarms powered?
eMACROS wireless driveway alarms all include solar-powered sensors with solar panels and built-in rechargeable batteries. The receiver runs on 4AA batteries or AC adapter(included), Hosmart wireless driveway alarms include rechargeable sensor without solar panels but with built-in rechargeable batteries. The receiver runs on 4AA batteries.or AC adapter(included).

5. False alarm
If you're experiencing many false alarms, it could be due to a few different reasons. Firstly, examine your sensor’s mounting position. Be sure your sensor is mounted around 4.5-6 feet off the ground to eliminate false alarms from smaller animals, and not facing direct sunlight. Your sensor is automatically set at the pick up distance of 30ft, so adjusting the distance down to 20ft by the low-mode sensitivity can help eliminate false alarms(see from the manual).

6. Interference
Obstructions such as metal, brick, trees, or inclines in your driveway can cause inference. They reduce the distance the signal travels. If you're not getting the sound from the receiver, the sensor may be too far away from the receiver to get a good signal under the interference condition. Adjust the position of the sensor and receiver to create a more reliable connection. Make sure the sensor is mounted around 4.5-6ft high.

Don't hesitate to ask a question in the Review section or contact us by email at service@hosmartmall.com. We'll get you taken care of!