Solar-powered Sensor: The solar sensor can be powered by a built-in rechargeable lithium-ion battery besides the solar panel. It will work for up to 6 months after charging with the DC5V adapter.
Super Long Range: Ideally maximum 1/2 mile wireless for the solar sensor and receiver, tested in severe weather conditions. The distance is double that of most competitor's.
Weather-proof: Industrial-grade PVC housing, rubberized weather/water-resistant seal for the sensor.
Expandable: Add up to 7 sensors to detect motion in different areas around your property; add extra receivers to be alerted throughout your home.
Multiple Designs: Brown-color sensor is blended in the trees or fence around your property. White color provides you more options for the look.
Easy Setup and Use: Install in minutes. Supported by PIR(passive infrared sensor). Alerts with optional sound and light (Both the receiver and sensor have off mode). No Internet and phone connection needed.
Additional Assurance: Two-year warranty . 24/7 customer service and technical support.
Dimensions: 8.35 x 4.61 x 2.68 inches for Package
Includes: 1 sensor, 1 receiver, 1 AC adapter, mounting hardware.
Sensor Range: Sensor detection up to 30 ft.The sensitivity can be adjusted.
Frequency: The frequency of the transmitter is 433mHz. Sensor Type: PIR (passive infrared )
Zones: Supports up to 7 sensors on each zone. 7 different tones allows you to distinguish which sensor was triggered and prevent interference. Volume is adjustable.
Power: The receiver can be plugged in using an included AC adapter or can run on 4 AA batteries (not included). A sound will alert low sensor batteries. Solar panel and built-in 18650 lithium-ion battery with DC5V adapter for the sensor.
Lights: Blue light shows the receiver is on. Red light shows the motion from the sensor. The receiver has a low battery alert light.
Weather: The working temperature range is from -20℃ to 60℃.
Installation: Sensor can be mounted to fences, trees, posts, mailbox and walls with included mounting hardware. Receiver can be portable up to 1/2 mile ideally without obstacles. Please make sure there is no metal interference. Set your sensor above the ground around 4.5-6 ft high. No straight light or leaves etc to the sensor eye. The sensor angle affects the range.
Warranty: Two-year warranty. 24/7 customer service and technical support.
Model Number: BT274
“This driveway sensor is helpful for more than just knowing when someone is at the stand. It also lets me know when the mail carrier has come, when my kids are sneaking over to the neighbors, and when my husband is pulling in from work”
“It was really nervous when a guy enters my property. What I did was to set up a camera but I want to be one step ahead. I want to know when they enters. It works pretty good for me at the cabin."
Watch full review video
We purchased and installed right away-easy peasy! It works like a charm!! Let’s us know when someone is coming thru our front gate, gives us time to see who’s coming down the sidewalk! Love it!!
1/2 Mile 7-Zone Solar Driveway Alarm Kit
Haven’t received them yet still waiting so at this stage my rating wouldn’t be good.
This system works great for us! It was easy to set up.
Very good value.
Right out of the box this product was easy to assemble and the instructions were very clear on how it works. Within a couple of minutes it was installed and working properly. The audible alarm was nice and clear and had several choices of tones. Overall, the alarm surpassed my expectations. Great product!
1. How does Wireless Driveway Alarm work?
The sensor has a passive infrared lens that activates when it senses both heat and motion. When the sensor is triggered by a person, car, or large animal, a signal is sent to the receiver in your home that will alert you with the sound you choose from the zones. The ideal maximum range between the receiver and sensor is 1/2 mile. The sensor has a maximum 30ft detection distance and the sensitivity is adjustable with low(approx 20ft.) and high(30ft.) mode. There's no wifi or monthly contracts required. Additionally, the system is weather-resistant and designed to work throughout the seasons. It works the same for day and night. It’s perfect to be used to detect who's on your property, when the mailman arrives, and more, especially for rural areas with driveways.
2. How do I know which system works best for me?
All of our driveway alarm kits have 1/2 mile wireless long range for the sensor and receiver. eMACROS driveway alarm features solar and rechargeable sensors. The 4-zone kit has the 4-zone receiver(square and round option) which supports up to 4 sensors and the 7-zone kit also has two color options. The Hosmart driveway alarm has 4-zone kits (two color options) featuring a rechargeable sensor with better price.
3. Are the solar wireless driveway alarm and the rechargeable driveway alarm compatible with each other?
No, the sensor and receiver can only be paired if they're the extras from the same kit.
4. How are the wireless driveway alarms powered?
eMACROS wireless driveway alarms all include solar-powered sensors with solar panels and built-in rechargeable batteries. The receiver runs on 4AA batteries or AC adapter(included), Hosmart wireless driveway alarms include rechargeable sensor without solar panels but with built-in rechargeable batteries. The receiver runs on 4AA batteries.or AC adapter(included).
5. False alarm
If you're experiencing many false alarms, it could be due to a few different reasons. Firstly, examine your sensor’s mounting position. Be sure your sensor is mounted around 4.5-6 feet off the ground to eliminate false alarms from smaller animals, and not facing direct sunlight. Your sensor is automatically set at the pick up distance of 30ft, so adjusting the distance down to 20ft by the low-mode sensitivity can help eliminate false alarms(see from the manual).
Obstructions such as metal, brick, trees, or inclines in your driveway can cause inference. They reduce the distance the signal travels. If you're not getting the sound from the receiver, the sensor may be too far away from the receiver to get a good signal under the interference condition. Adjust the position of the sensor and receiver to create a more reliable connection. Make sure the sensor is mounted around 4.5-6ft high.
Don't hesitate to ask a question in the Review section or contact us by email at email@example.com. We'll get you taken care of!